SF7128 Insignia Red System 7 Superflex Topcoat - Quart


Many in stock



The Superflite System 7 Superflex topcoat is the latest urethane technology for fabric covered airplanes.  System 7 is more durable, flexible, and affordable than any other urethane on the market today.  It's easy to apply, easy to repair, and gives you a show quality finish with minimal effort.

Mixing Ratio:

2 parts paint to 1 part SF8950 catalyst.  Thin ½ part with one of the 7800-series reducers.

Compatible Substrates:

System 7 Topcoats may be applied over:

Fabric coated with the Superflite System 7  Superflex Primer

Aluminum or steel coated with the Superflite System 7 Epoxy Primer

Fiberglass or composite coated with the Superflite System 7 Epoxy Primer

Surface Prep:

Fabric:  apply two coats of the Superflite System 7 fabric primer, sand, and clean with Superwash.

Metal:  apply two coats of the Superflite System 7 epoxy primer, sand, and clean with Superwash.

Pot Life:

@70ºF/50% RH

6 hours

High heat and humidity will shorten pot life.

 Spray Viscosity:

#2 Zahn cup: 20-25 seconds

 Spray Gun Set-Up:

Fluid Tip:

HVLP – 1.3-1.5 mm

Conventional – 1.3-1.5 mm

 Air Pressure:

HVLP – 8-10 PSI at the cap

Conventional – 50-60 PSI

Pressure Pot Set-Up:

HVLP - 1.0-1.4 mm with 8-12 fluid oz. per minute

Conventional – 1.0-1.4 mm with 8-12 fluid oz. per minute

Optimum Spraying Conditions

Ambient Temperature:  >60ºF

Number of Coats:

1-1.5 cross coats or 2-3 passes

Allow 15-20 minutes flash between coats.

Theoretical Coverage:

514-659 square feet

*Ready to Spray gallon, giving 1 mil dry film thickness

 Health and Safety:

Fresh air breathing mask, safety goggles, and skin protection required.

Return Policy

Returned goods must have been originally purchased from Superflite and returned to us in new unopened condition, in their original packaging within thirty (30) days from the invoice date. Please package the return goods in a proper shipping box to protect the integrity of the original package and items.

All returned goods require a Return Material Authorization (RMA) be issued in advance of the return. RMA’s can be obtained by contacting a Superflite Customer Service Representative. Items returned without an RMA will not be processed and will be returned to you at your expense. You MUST call Superflite before returning anything.

All returned goods are subject to a restocking and handling charge of up to 25%.

If the parts or products were “Special Order” the return is subject to the manufacturer’s willingness to accept the product back. The return is also subject to any manufacturer’s handling charge plus a restocking fee.

All Superflite paints/topcoats are mixed as ordered. If a color other than those offered on the Superflite color chart is ordered and mixed, it cannot be returned, nor will it be refunded. If there is a discrepancy with the color ordered and received, it must be reported within seven (7) days for a return or refund to even be considered.

No restocking fee will be charged on returns resulting from our error. All return freight must be prepaid. If returned goods are lost or damaged in transit to Superflite, you must submit the claim against your carrier.

Recently Viewed Products