SF7460 Cessna Sunset Red System 7 Superflex Topcoat - Pint
SF7460-08
Many in stock
Superflite
The Superflite System 7 Superflex topcoat is the latest urethane technology for fabric covered airplanes. System 7 is more durable, flexible, and affordable than any other urethane on the market today. It's easy to apply, easy to repair, and gives you a show quality finish with minimal effort.
Mixing Ratio:
2 parts paint to 1 part SF8950 catalyst. Thin ½ part with one of the 7800-series reducers.
Compatible Substrates:
System 7 Topcoats may be applied over:
Fabric coated with the Superflite System 7 Superflex Primer
Aluminum or steel coated with the Superflite System 7 Epoxy Primer
Fiberglass or composite coated with the Superflite System 7 Epoxy Primer
Surface Prep:
Fabric: apply two coats of the Superflite System 7 fabric primer, sand, and clean with Superwash.
Metal: apply two coats of the Superflite System 7 epoxy primer, sand, and clean with Superwash.
Pot Life:
@70ºF/50% RH
6 hours
High heat and humidity will shorten pot life.
Spray Viscosity:
#2 Zahn cup: 20-25 seconds
Spray Gun Set-Up:
Fluid Tip:
HVLP – 1.3-1.5 mm
Conventional – 1.3-1.5 mm
Air Pressure:
HVLP – 8-10 PSI at the cap
Conventional – 50-60 PSI
Pressure Pot Set-Up:
HVLP - 1.0-1.4 mm with 8-12 fluid oz. per minute
Conventional – 1.0-1.4 mm with 8-12 fluid oz. per minute
Optimum Spraying Conditions
Ambient Temperature: >60ºF
Number of Coats:
1-1.5 cross coats or 2-3 passes
Allow 15-20 minutes flash between coats.
Theoretical Coverage:
514-659 square feet
*Ready to Spray gallon, giving 1 mil dry film thickness
Health and Safety:
Fresh air breathing mask, safety goggles, and skin protection required.
Return Policy
Returned goods must have been originally purchased from Superflite and returned to us in new unopened condition, in their original packaging within thirty (30) days from the invoice date. Please package the return goods in a proper shipping box to protect the integrity of the original package and items.All returned goods require a Return Material Authorization (RMA) be issued in advance of the return. RMA’s can be obtained by contacting a Superflite Customer Service Representative. Items returned without an RMA will not be processed and will be returned to you at your expense. You MUST call Superflite before returning anything.
All returned goods are subject to a restocking and handling charge of up to 25%.
If the parts or products were “Special Order” the return is subject to the manufacturer’s willingness to accept the product back. The return is also subject to any manufacturer’s handling charge plus a restocking fee.
All Superflite paints/topcoats are mixed as ordered. If a color other than those offered on the Superflite color chart is ordered and mixed, it cannot be returned, nor will it be refunded. If there is a discrepancy with the color ordered and received, it must be reported within seven (7) days for a return or refund to even be considered.
No restocking fee will be charged on returns resulting from our error. All return freight must be prepaid. If returned goods are lost or damaged in transit to Superflite, you must submit the claim against your carrier.
